Get the new Great British Sewing Bee book worth £30 when you subscribe to Simply Sewing magazine
Your wardrobe Is failing you and it’s not because you lack clothes, but rather that you probably own too many. Here’s how to fix that.
Dream up your next big idea or get lost in a good book on a plump floor cushion. Ours has a zip fastening for easy washing in case of spills, and we’ve appliquéd a ‘Dream Big’ motif to remind us to do just that!
Looking for more space-inspired makes? Try this constellation embroidery pattern, make a star wall hanging or explore our collection of 31 constellation crafts.
Read on to learn how to make Rebecca’s Dream big floor cushion sewing pattern.
Materials used
Main fabric: Mariao for Spoonflower: Map of our Sky. Kona fabric is no longer available, but you could use one of the alternative fabrics listed. If you’d like to try a similar fabric, we like this Twinkle Twinkle furnishing fabric from John Lewis or this Rose and Hubble constellation fabric from Etsy.
Appliqué fabric: Spectrum, Ivory. Ref: 2000/Q01. For stockists visit www.makoweruk.com
Notes
- Use a 1.5cm (5⁄8in) seam allowance.
- For the lettering, you’ll need to download the Simply Sewing templates.
You will need
-
Main fabric
80x160cm (32x64in) -
Applique fabric
50x50cm (20x20in) -
Bondaweb
50x50cm (20x20in) -
Zip
70cm (28in) -
Cushion pad
76x76cm (30x30in) - Basic sewing kit
Method
Cutting out the fabric
1
Cut the main fabric into two squares, each measuring 78x78cm (31x31in) for the front and back of the cushion.
2
Trace over the appliqué words onto tracing paper then turn your traced pattern over to the wrong side (WS) and place your Bondaweb, paper side up on top. Trace over the words.
3
Place your traced Bondaweb paper side up onto the WS of the appliqué fabric and press gently into place until it is firmly stuck using a dry medium temperature iron (don’t use any steam).
4
Carefully cut out all the words along your drawn pencil lines. Remove the paper backing then you are ready to stick them in place.
Appliqueing the words
1
Place your cushion front fabric right sides (RS) up then place all the letters centrally on top and press to fix them in place.
2
Work a machine zigzag stitch around the edge of each letter so one side of the stitch goes into the appliqué fabric and the other side into the main cushion front fabric beneath. This will hold the appliqué letters firmly in place.
Inserting the zip
1
Place the front and back cushion fabric pieces RS together. At the bottom side of the cushion, stitch 3cm (1¼in) from each edge.
2
Using your longest machine stitch, stitch between these two lines.
3
Press the seam open then lay both pieces RS down. Pin the zip RS down on top of this, making sure the teeth run centrally down the central seam. The zip slider should sit just 2mm (1⁄16in) below the end of the side seam so that the zip tape above it is on top of the side seam. The other end of the zip should extend beyond the other side seam. Pin into place.
4
Stitch the zip into place all the way around, starting at the closed end. When you reach the zip slider, raise your machine foot but keep the needle in the fabric. Pull the zip down a little, continue stitching then pull the zip slider back and continue stitching back to the closed end. In this way you will have a neat row of machine stitching around the zip without a break in the stitches.
5
Undo the long machine stitches you worked between the side seams and you will have a neatly inserted zip.
Making the cushion cover
1
Place the cushion front and back RS together making sure the zip is undone a little way. Stitch together around the three sides without the zip.
2
Press the seams open, clip the corners then turn RS out and press.
3
Put the floor cushion pad inside the cover, close the zip and you’re done.
You’re finished! Enjoy using your Dream big floor cushion sewing pattern in your new-look bedroom. Looking for more floor cushions to make? Try our DIY floor pillows sewing pattern.
