Get the new Great British Sewing Bee book worth £30 when you subscribe to Simply Sewing magazine
Season 12 of The Great British Sewing Bee has come to an end and what a season it has been! Read to find out who won and their experience on the show.
Laid stitch is a fantastic way to use embroidered grids to you a more subtle effect than filling in your shapes with solid colour. In this tutorial we’ll show you the basics of the stitch, then when you’re feeling confident we’ll move onto getting a bit more creative with them by making a DIY tote bag!
You will need
- Linen fabric: 33x66cm (13x26in), bag front and back
- Cotton fabric: 50x70cm (20x28in), bag bottom and lining
- Cotton wadding: 40x70cm (16x28in)
- Stranded cotton
- Bag handles: one pair approx 65cm (25in) in length
- Basic sewing kit
Notes
Use a 1cm (3/8in) seam allowance.
You will need to download and print the Free Laid stitch DIY tote bag pattern template.
How to do Laid stitch
You will need
- Linen fabric
- Cotton fabric
- Wadding
- DMC stranded cotton
- Bag handles
- Basic sewing kit
Method
1
Create a grid of long straight stitches. Work all the horizontal lines first then all the vertical lines across them. They can be positioned as close or as far apart as you like, and they can be straight or on the diagonal.
2
Make a small cross stitch at each point of the grid where the lines intersect. The cross can be large or small, or in a second colour if you prefer. Make sure that all of the cross stitches are worked in the same direction.
How to make a DIY tote bag
Cutting the fabric
Step one
Cut the linen fabric into two pieces, each measuring 33x33cm (13x13in).
Step two
Cut the cotton fabric as follows:
- Bag bottom: two pieces 9x33cm (35/8x13in).
- Bag lining: two pieces 40x33cm (153/4x13in).
Step three
Cut the wadding into two pieces, each measuring 40x33cm (153/4x13in).
Stitching the design
Step one
Trace over the template then place the bag front right sides (RS) up on top so that the stars are positioned centrally across and 5cm (2in) up from the bottom edge.
Step two
Fill the large stars with laid stitch using three strands of aqua stranded cotton.
Step three
Work the outlines for the large stars and smaller stars in backstitch using three strands of teal stranded cotton.
Making the bag
Step one
Place one bag bottom RS facing along the lower edge of the stitched front and stitch together then press the seams open.
Step two
Repeat this to stitch the other bag bottom RS facing across the lower edge of the bag back.
Step three
Place one piece of lining fabric RS up on top of one piece of wadding and quilt together in vertical lines for a quilted lining.
Step four
Repeat this with the other piece of lining fabric and wadding.
Step five
Place one quilted lining RS together with the bag outer front then stitch together across the top edge.
Step six
Repeat this with the other quilted lining and bag back.
Step seven
Pin the two bag outers RS together and the two linings RS together.
Step eight
Stitch together all the way around but leaving a 10cm (4in) turning gap in the centre of the bottom edge of the lining.
Step nine
Trim the corners and turn the bag RS out. Slip stitch the opening closed then push the lining inside the bag.
Finishing off
Step one
Work a running stitch by hand around the top edge of the bag.
Step two
Sew the handles onto the bag, spacing and aligning them evenly.
